1987 Lincoln Town Car emmisions valve removal
R M’s question:
Hi , I have a 1987 Lincoln Town Car. How do I install an emissions valve & tubing that goes from the passenger side of the motor to the back of the engine. I know there are two bolts in the back that attach the tubing. Would I need special tools? Thanks”
Answer:
There are no special tools, BUT realize that baby has gotten REALLY hot from the exhaust fumes and often they just rust on. Try soaking them with some PB blaster spray overnight. Then attempt to take it off. There isn’t much working room there, and sometimes mechanics even have to use a torch to cut the old one off if things are really rusted and corroded. good luck
